SPECIFICATIONS
Standard Equipment
Extendible Boom
Hose Reel
HC120R Reverse Perussion Hydraulic Drifter
On board 8.7 m3/min @ 0.95 MPa (307 CFM @ 138 PSI) Air Compressor
90 degree Indexed Drill Guide
Auto Rod Changer for 51R / 12 ft. drill road x 6 with Auto Thread Greaser
Hydraulic Centralizer (72mm Half Bushing)
ROPS & FOPS Cab with Air Conditioner
Emergency STOP Device on Drill Guide
Dust Collector with vertical sliding hood
Auto Drilling System (MONTABERT)
Full Length Track Guards
Triple Plate track show
Auto Engine Speed Control
Rear Mirror
Working Lights ( Front: 3/ Rear: 1)
Warning Horn
Backup Alarm
Drifter Hour Meter
Low Level Warning for Fuel Tank and Hydraulic Oil Tank
Fire Extinguisher (6.0kg)
24 Volt Electrical System
JIC Hose Fittings
Inclinometer
One set of Instruction Manuals and Spare Parts Lists
WEIGHT AND DIMENSIONS
Shipping mass including Auto Road Changer and ROPS/FOPS Cab: 13,000 kg
DIMENSIONS
Overall Length (including Drill Guide): 9,980mm
Overall Width (including Dust Collector and Step): 2,630mm
Overall Height (in Tramming Position): 330mm
Ground Clearance: 420mm
PERFORMANCE SPECIFICATION
Engine Make/ Model: Cummins/ 6CTA8.3
Rated Power @ 2,200 rpm: 176kW (236hp)
Tramming Speed: 0 - 3.2 km/h
Gradability: 30 degrees
Track Oscillation (U/D): 8 / 10 degree
On board Compressor Make / Type: Ingersoll Rand / Screw Type
Actual Free Air Delivery: 8.7m3/ min
Maximum Air Discharge Pressure: 0.95 MPa (9.7 kgf/cm2)
HYDRAULIC DRIFTER SPECIFICATIONS
Make / Model: MONTABERT/ HC120R
Percussion Impact Energy: 530J (54kg.m)
Percussion Frequency: 2500 bpm
Rotation Torque: 1225 N.m (125 m.kg)
Rotation Speed: 160 min -1 (160rpm)
DRILL GUIDE SPECIFICATIONS
Overall Length: 7,660 m
Feed Length: 4,250 mm
Fast Feed Speed: 40 m/min
Slow Feed Speed: Max. 10m/min
Feed Force: 19.6kN (2000 kgf)
Guide Extension Length: 1,500 mm
Guide Dump Angle: 135 degree
Guide Swing Angle (R / L): 20 / 90 degree
BOOM SPECIFICATIONS
Overall Length: 2,760 mm
Boom Extension: 800 mm
Boom Lift Angle (Above / Below): 55 / 20 degree
Boom Swing Angle (R / L): 55 / 10 degree
DUST COLLECTOR
Model: SDC-1000
Blower Capacity: 28 m3/ min
Air Vacuum Pressure: 7,850 Pa (800 mmAq)
Filter Area: 23 m2
OIL VOLUMES
Hydraulic Oil Tank: 200L
Fuel Oil Tank: 400L
DRILLING ACCESSORIES
Rod Diameter (Standard/ Optional): 51 R / 45R
Drill Road Length: 3660 mm (12ft)
Bit Diameter: 76 - 114 mm
ROD CHANGER CAPACITY
Quantity of Drill Rods: 6 x 51 R
|
